There are several steps for painting a basement floor to ensure good coverage and durability. Most types of basement flooring can be painted, including wood, ceramic tile, vinyl tile, vinyl sheeting, and linoleum. Some homeowners have also painted concrete basement floors with good success. Regardless of the floor material, before painting can be begin the surface must be properly prepared, which includes a thorough cleaning, repairing cracks, and allowing the surface to fully dry. The paint application process involves applying primer coats before adding color and design patterns.
The preparation phase of painting a basement floor is considered to be very important by the home improvement experts, and must be well executed. It is crucial to remove all debris, dirt, and wax from the surface of the floor, as the paint and primer will be unable to cling to the surface otherwise. If the basement floor is made from ceramic tile, it is advised to sand the tiles after they have been cleaned in order to encourage better paint adhesion. Once the floor has been cleaned properly, the next preparation step is to repair any cracks or holes in the floor. This step ensures the paint doesn't pool in the crevices and mar the final appearance of the project.
The next step of painting a basement floor is to apply a good quality primer to it. The first coat will need to set up, or cure, for at least 12 hours before the next coat of primer can be applied. After the second primer coat dries for another 12 hour period, the first coat of paint can be applied using either a paint sprayer device or painting by hand, with a paint roller equipped with a long handle. In most cases, it is suggested to apply at least two coats of paint, applied at least 24 hours apart. Complete drying between each paint layer is essential to ensure the paint cures properly and is resistant to accidental flaws or blemishes.
When painting a basement floor, the final phase is to apply a waterproof sealant to protect the new finish. Most home improvement specialists recommend a urethane based product for this job. After the final coat of paint has dried thoroughly, the two to three coats of urethane should be applied, allowing plenty of time for each coat to dry. This step is ideal for protecting the paint layers underneath as well as promoting longer wear for the new floor finish.
