Baseboard heating is very common in North American homes. These units are an unobtrusive and cost-effective way to maintain comfortable room temperature. There are two types of baseboard heating: permanent and mobile. Each method has strengths and weaknesses that affect your decision to purchase baseboard heaters.
Permanent baseboard heating systems are installed as individual room units. When converting an older home for modern use, it is very common to install baseboard heaters in every room. This method is preferable to installing central heating, which can be quite expensive in an older home, due to the limitations in space.
To install a baseboard heating system, measure the size of the room and then purchase a heater that is capable of heating a room of that size. Select a location that has easy access to a power outlet and make sure that it is on the same side as the plug. Follow the instructions in the package to secure the baseboard heater to the wall or the floor.
If you are installing a number of baseboard heaters in a home, remove the baseboard molding that is often attached to the wall. This will allow the heater to sit flush with the wall and take up less space. Make sure to cover the outlet for any heater located in the bathroom to reduce the exposure to water.
Each unit has a temperature setting and thermostat to maintain a comfortable room temperature. Many people build vented enclosures for the heater and paint it to match the room decor. Baseboard heaters require less work to install than a central heating unit. It is important with this type of heating system to keep the doors closed so that the unit is heating the appropriately sized space. Purchase units with a built in thermostat, so that you can set the desired temperature in advance.
Mobile baseboard heating systems are electric units on wheels. They are typically carton shaped and are designed for easy transportation between locations. This type of heater is quite powerful and can quickly heat a room. In an open concept space without central heating, these types of units can be the most cost effective way to heat the space.
Mobile heating units require a significant amount of power. Check the electricity load for the circuit before plugging in the heater. The most common cause of electrical fires in homes is an overloaded circuit caused by a plugged in electric heater. The electricity rating for the heater is printed on the plug itself.
