Some fluoride removal systems are designed to treat the water of an entire household. Other types filter the water from a single source, such as a kitchen sink. Units may consist of only one tank or multiple ones. Models can be freestanding units, mounted on the wall or under a sink, or made to sit on top of a counter.
Many homeowners prefer to treat all the water in their household even though it may not be used for drinking or cooking. These individuals may choose a fluoride removal system designed to treat water from all sources within the home. A unit such as this normally consists of multiple tanks that somewhat resemble narrow water heaters. Each tank filters a particular type of contaminant. For example, one could remove fluoride while another one eliminates chlorine or arsenic.
Other types of fluoride removal systems are designed to treat the water from a single source. These units may contain a single canister or multiple ones. They are typically attached underneath the sink then hooked up to the water line. There may be a lever located just below the faucet so that people can dispense purified water. A model such as this is normally intended to be left in place until the homeowner moves.
Countertop systems also treat the water from a single source. These models usually sit on top of a counter so that they are easy to transport from one location to the next. They may have anywhere from one to three cylinders. One cylinder might be dedicated to removing fluoride, while the others are designed to remove other contaminants.
Some units are intended to be used with refrigerators that dispense water. They are helpful in ensuring that ice made by such a refrigerator does not contain fluoride. These fluoride removal systems can be mounted on the wall near the appliance. They normally consist of two cylinders, one of which is narrower than the other.
Drinking plenty of fresh, clean water is an important part of maintaining good health. People who are concerned about the effects of fluoride and other additives in their drinking water may want to consider buying a fluoride removal system for their home or office. They are typically very inexpensive to purchase and easy to install and maintain. Having one installed can ensure people have water to drink that is free of contaminants and tastes good as well.